Zhongwen
Tools | Media | News | Buy  
About us | Contact us  

PSE-22

Now there is a new version with 5 stepper motors, it is a little larger than the PSE-20, it is controllable by game-pad, the PSE-22:

  • PSE-22-2M with 2 USB MICROSCOPES 90% automatic machine
    It comes with a GAMEPAD
  • PSE-22-AV with 2 AV MICROSCOPES and a 9 inch TFT monitor with 2 input channels 90% automatic machine
    It comes with a GAMEPAD

The PSE-22 is fully equipped with: 5 stepper motors, vacuum pump, rotary pipe joint, 2 USB microscopes or 2 AV microscopes + 9 inch TFT monitor, 2 USB cable extensions or 2 AV cable extension, pedal switch, 2 electro-valves, pipes, 12V 10A power supply, enough to run the machine and an optional 5.5W laser module, GAMEPAD... Weight (pad excluded) is about 4 kg (8.8 lb), size 54cm x 50cm (21.2 x 19.7 inches). It can use centroids files to automate the movements and an optional 5.5 watts laser module can be installed to cut your stencil or to cut and engrave whatever you need.

Assorted needles of different size are provided. Tools to assemble are provided.

All the PSE-20 can be upgraded to PSE-22 buying the upgrade kit check the manual session

 

 

The PSE-22. Our top Pick & Place machine: 5 stepper motors, controllable by GamePad (TOTAL RELAX), can use centroids files to move automatically to the pads. There is an optional 5.5 watts laser module, to cut your stencil or to engrave and cut what you like.

The PSE-22. 90% automatic Pick & Place machine: 5 stepper motors, controllable by Game Pad, can use centroids files and an optional 5.5 watts laser module.

There is a new pump, it is more efficient, powerful and quiet compared to the old pump.. it fixes the problem of the old pump in relation to sporadic lack of power and electromagnetic interference... it is enough to keep the pump to the very low minimum, increase the power if you need to lift a component misplaced on the solder-past...
Please connect the 2 electro-valves like in the picture

NEW PUMP:  it is more efficient, powerful and quiet compared to the old pump.. it fixes the problem of the old pump in relation to sporadic lack of power and electromagnetic interference...

NEW PUMP:  it is more efficient, powerful and quiet compared to the old pump.. it fixes the problem of the old pump in relation to sporadic lack of power and electromagnetic interference...

 

 

PSE-22: equipped with 5 stepper motors controllable by GAME-PAD

The PSE-22. Our top Pick & Place machine: 5 stepper motors, controllable by GamePad (TOTAL RELAX), can use centroids files to move automatically to the pads positions. Can move continuously at different speed or by steps of different sizes... the smaller step is less than 0.1 millimeters. The rotation of the component is controlled by gamepad too. The component is released automatically by a limit switch on the Z axis, or can be released by pedal. There is an optional 5.5 watts laser module, to cut your stencil or to engrave and cut what you like. Parts of the machine are cut with the machine itself on acrylic 3 and 5 millimeters. Size 54cm x 50cm (21.2 x 19.7 inches). Assorted needles of different size are provided for the suction system . The function of the buttons on the Game Pad is configurable.


Optional: components rack, green CUTTING MAT, 5.5W laser module and laser mount.

We strongly suggest you to buy an A1 cutting mat locally... It is too expensive to ship it from China, because it is quite heavy... You can do it also with an A2, it is just a little smaller than the machine and its feet will not lay on it.

 

 

PSE-22-2M:USB 2 microscopes configuration

In the picture below you can see the configuration with two USB microscopes. Having 2 microscopes eliminates the parallax error... you clearly see the exact alignment on both axes, and you can place the components trusting your eyes, on the go... no need for the reference point method as for the 1 microscope configuration...

 

To have 2 micorscopes, one for each axis, eliminates the parallax error.

Check the MEDIA GALLERY to watch videos and pictures.

 

PSE-22-AV: 2 AV microscopes + one 9" TFT AV monitor with 2 input AV channels

The PSE-22-AV: 2 AV microscopes, 2 AV cable extensions, one 9" TFT MONITOR with 2 AV inputs and split capabilities. With this monitor you can see the 2 microscopes view at the same time in the splitted screen or you can switch between the full screen view of the single microscope with the button V1/V2


 

PSE-20 AV: 2 AV microscopes, one 9 inch TFT MONITOR with 2 AV inputs and split capabilities

 

 

Check the MEDIA GALLERY to watch videos and pictures.

2 AV microscopes + 9" TFT monitor configuration

 

 

A quick Presentation of the PSE-22

 

 

 

What you get with the PSE-22

Give a look at the features

 

The PSE-22. Our top Pick & Place machine: 5 stepper motors, controllable by GamePad, can use centroids files to move automatically to the pads. There is an optional 5.5 watts laser module, to cut your stencil or to engrave and cut what you like.

The PSE-22. Our top Pick & Place machine: 5 stepper motors, controllable by GamePad, can use centroids files to move automatically to the pads. There is an optional 5.5 watts laser module, to cut your stencil or to engrave and cut what you like.

The PSE-22. Our top Pick & Place machine: 5 stepper motors, controllable by GamePad, can use centroids files to move automatically to the pads. There is an optional 5.5 watts laser module, to cut your stencil or to engrave and cut what you like.

 

Check the MEDIA GALLERY to watch videos and pictures.

5 stepper motors controllable by GAME-PAD

All the PSE-20 can be upgraded to PSE-22 buying the upgrade kit check the manual session

 

*** SOFTWARE, CONFIGURATION, ASSEMBLING AND USE ***

 

 

PickSoEasy-logoTo operate any PSE model, no matter if manual or automatic, does not require special ability, but it does require a little bit of practice to understand how to move and how to stop steady in a place. The rotation can be controlled thanks to a rotary joint. The needle can rotate independently from the pipe connected to the vacuum pump. This is well shown in some videos in the media gallery. To release the component you will use a pedal switch and in the PSE-22 the component can be released also automatically.

features | manual | media |

 

I cannot say made in Italy, but i can say...      MADE BY ITALIAN  

 

 

 

 

 

© Copyright 2020 PickSoEasy, all rights reserved