PickSoEasy PSE-3000, fully automatic openPNP pick and place machine. Features and specifications.

 

PickSoEasy PSE-3000, fully automatic openPNP pick and place machine. Features and specifications.

PSE-3000

HomeProductsPSE-3000
The PSE-3000. Fully automatic, OpenPNP
The PSE-3000. Fully automatic, OpenPNP Pick & Place machine. Ultra precise and fast. Positioning Accuracy 0.05 mm. Weight 26 kg (57 lb).
PSE-3000. Fully automatic, OpenPNP

PSE-3000 - OpenPNP

Fully automatic pick&place machine

This is our new OpenPNP pick & place machine It is 100% compatible with the standard OpenPNP V2 software, and it is therefore a fully automatic pick&place machine.

 

The PSE-3000 will arrive at your home fully assembled and precalibrated. Every machine has its own calibration file, those will be provided. Many instruction videos about the machine and the OpenPNP software will be available on this website! You will be guided step by step.

 

 
 
What is in the box?
 
  • 5 Juki-like nozzles are provided: #502 - #503 - # 504 (2) - # 505.
  • 1 automatic feeder 8 mm with 3 slots (you can load 3 different component strips)
  • 3 plastic racks 8 mm with magnets
  • 1 plastic racks 12 mm with magnets
  • 1 power cable
  • 1 USB cable
  • 1 SMD component reel holder with brackets and long stick (can hold more than 12 reels)
  • 1 pump, it will be mounted on the back
  • Specific calibration files for your PSE-3000 that you will install on your PC
  • Red aluminum holders to keep the PCB in position.
  • Tools and test board to complete the calibration of the PSE-3000
 
Videos and instructions to guide you step by step are available in the support area!
 
 

PSE-3000 Features

The stepper motors are MKS 57D, NEMA23, closed loop!
The head, is a dual nozzle system, Juki compatible.
The nozzles are changed by the machine automatically in relation to the size of the components.
The PSE 3000 has 2 cameras: upper and lower vision. The components will be recognized, rotated, aligned and placed automatically with an accuracy of 0.05 mm.
The PSE-3000 is equipped with a communication rail for automatic electronic feeders. Each feeder controls 3 strips of components. You can add 12 electronic feeders. It means you will have 36 strips of SMD components available. Plus, if you need, 20 plastic racks with magnets.

 


 
Automatic Feeders
Automatic feeders for the PSE-3000 openPNP pick and place machine
Automatic feeders for the PSE-3000 openPNP pick and place machine
Automatic feeders for the PSE-3000 openPNP pick and place machine
 
 
Automatic electronic feeders, they are fast and relaiable. You can easily set an address for each one. You can fit 12 feeders on the communication rail, for a total of 36 SMD strips. You can even add magnetic plastic racks on the working area, in case you need to add just a few components on the PCB. I fit 3 different kinds components for each rack...
Dual nozzle
Juki nozzles system for the PSE-3000 openPNP pick and place machine
Juki nozzles system for the PSE-3000 openPNP pick and place machine
Juki nozzles system for the PSE-3000 openPNP pick and place machine
 
 
The head is a dual nozzle system, Juki compatible. The nozzles are changed by the machine automatically in relation to the size of the components. Five nozzles are provided: #502 - #503 - # 504 (2) - # 505. The 5 slots nozzles holder can be mounted in different positions and the configuration of the software (OpenPNP V2) is quite easy. Video will be made to guide you step by step. However you will receive the configuration files and the position of the provided nozzles on the holder should be already OK without you having to configure the software.
Two cameras
Upper and lower vision for the PSE-3000 openPNP pick and place machine
Upper and lower vision for the PSE-3000 openPNP pick and place machine
Upper and lower vision for the PSE-3000 openPNP pick and place machine
 
 
Upper and lower vision. Thanks to this system the components will be recognized, rotated, aligned and placed automatically... Once OpenPNP V2 is properly configured the components will be located, picked up, brought to the lower vision camera and analyzed, then rotated accordingly to the position on the board, aligned and finally placed correctly. Videos will guide you to configure the bottom vision (preconfigured) and will help you to understand the system.
 
 

A quick Presentation of the PSE-3000

 
 
 
 
 

PSE-3000 SPECIFICATIONS

Compatibility Fully compatible with openPNP V2
Feeders number potential Can accomodate 36 controlled elctric feeders (12x3) + 20 plastic racks (with magnets) feeders
Number of nozzles

The head has 2 NOZZLES that can be both changed automatically
Stepper motors

The stepper motors are MKS 57D, NEMA23, closed loop!
Controller

MainBoard Duet Clone FLY CDY V3
Vision system

2 cameras: top and bottom vision, the components will be recognized, aligned and placed automatically.
Power consumption

Power abosorbed 250W
Positioning Accuracy

0.05 mm
Gross weight

25KG / 57 pounds
External Dimensions

53x45x33 cm - 20.9x17.7x13 in
XY moving range

37x26 cm - 14.6x10.2 in
Guides

XYZ and rotation movements by timing belt and rails
Maximum travel speed

50000mm/min
CPH - components per hour

Typical speed 2000, Average speed 1500, Maximum placement speed 2200
Maximum PCB dimensions

20*30cm - 7.9x11.8 in
RFI Filter

The filter was before connected to the pump. Now it is inside the machine close to the controller.
 
 
 
 
PSE-3000 openPNP side view
PSE-3000 openPNP side view
PSE-3000 openPNP rear view
 
 
 
 
PSE-3000 openPNP, dual nozzle system, Juki compatible
To operate any PSE model, no matter if manual or automatic, does not require special ability, but it does require a little bit of study and practice to understand the system. The PSE-3000 is 100% compatible with the standard OpenPNP V2 software, and it is therefore a fully automatic pick&place machine. Once everything is set up, you just click on the play icon in the OpenPNP V2 software and the magic happens...

 

Do not feel overwhelmed. The system is not as complicated as it seems. You can follow our video and our instruction. You will be guided step by step, and if you have some doubts, just send us a message. Visit the support area for the PSE-3000.
 
 
All Rights Reserved | Copyright 2018 - © PickSoEasy