PSE-3000 Support
Here you will learn everything about the PSE-3000
How to unbox, download, install and configure our PSE-3000 openPNP. You will learn to use the automatic feeders, create centroid files and more...
You will be guided step by step, and after a few hours you'll be able to start your first job. Real scenarios of work are shown so as possible mistakes. You will also learn about maintenance and calibrations. More videos will be made in the future, so keep visiting this page and periodically check our YouTube channel.
-
PSE-3000 QUICK START GUIDE: and openPNP crash course. Learn here.
-
Connecting your PSE-3000 openPNP to your Wi-Fi. DWC... Learn here.
-
PSE-3000 - Loose parts feeder: Scattered components in order... Learn here.
-
PickSoEasy PSE-3000 openPNP - Maintenance: Once in a while. Learn here.
-
PickSoEasy PSE-3000 openPNP Calibrations: Getting precise again. Learn here.
PSE-3000 Quick start guide
And OpenPNP crash course
This is a long video and it is divided into paragraphs (view it on YouTube and open the comment section to see the list of the paragraphs). Please watch it entirely, because 1 hour spent here will save you tons of hours along the way!
Below a shorter guide for people who already know a lot about openPNP.
Connecting your PSE-3000 openPNP to your Wi-Fi
Using DWC (Duet Web Control)
DWC allows us to communicate directly with the controller to check the configuration of the firmware and the status of the PSE3000. Maybe you will never need to use, but it is good to know that something is poosible.
PSE-3000 openPNP - Loose parts feeder
To pick up randomly scattered components
A loose parts feeder is a feeder with backlight. It allows the PSE3000 to easily pick and place components scattered randomly on it. No more wasted parts. Here you will learn about the necessary setting of the top vision pipeline, and more.
PickSoEasy PSE-3000 openPNP - Maintenance
Once in a while you may need it
The maintenance of the PSE3000 is a very simple procedure. keep the guide rails always lubricated. And once a year adjust the tension of the belts. Follow this video.
PickSoEasy PSE-3000 openPNP Calibrations
To get precise again
The PSE3000 will arrive at your home already calibrated and configured.
After some months you use the PSE3000, it may be the moment to calibrate it again. This may be the case if by mistake you crashed the nozzles on the nozzles holder numerous times.
To operate any PSE model, no matter if manual or automatic, does not require special ability, but it does require a little bit of practice to understand how to move and how to stop steadily in a place. The rotation can be controlled thanks to a rotary joint. The needle can rotate independently from the pipe connected to the vacuum pump. This is well shown in some videos in the media gallery. To release the component you will use a pedal switch
Do not feel overwhelmed. You can follow our video and our instruction. You will be guided step by step, and if you have some doubts, just send us a message.